100% performance tested confidence that each jack module will deliver the critical electrical performance requirements utilizes enhanced optimizes performance by eliminating conductor untwist; g iga -tx ? technology reduces installation expense improved termination cap conductor retention slots simplify termination modularity jack modules snap in and out of m ini -c om ? faceplates, modular patch panels and surface mount boxes for fast moves, adds and changes true strain relief controls cable bend radius for long term installed performance individual serialized marked with quality control number for traceability industry standard familiar to end-users; backwards compatible rj45 interface www.panduit.com category 6/class e exceeds all tia/eia-568-b.2-1 category 6 and iso 11801 channel and 2nd edition class e standard requirements at swept component performance: frequencies up to 250 mhz fcc compliance: meets fcc part 68 subpart f; contacts plated with 50 microinches of gold for superior performance iec compliance: meets iec 60603-7 key features and benefits applications technical information specifications category 6/class e eight-position jack module shall terminate unshielded twisted 4 pair, 22 ? 26 awg, 100 ohm cable and shall not require the use of a punchdown tool. jack module shall use forward motion termination to optimize performance by maintaining cable pair geometry and eliminating conductor untwist. the white termination cap shall be color coded for t568a and t568b wiring schemes. m ini -c om ? tx6 ? plus utp jack module is a component of the tx6500 ? and tx6000 ? copper cabling systems. interoperable and backward compatible, these end-to-end systems provide design flexibility to protect network investments well into the future. with certified performance to the tia/eia-568-b.2-1 category 6 and iso 11801 class e standards, these systems are ideal for today's high performance workstation applications. usage of the tx6500 ? and tx6000 ? copper cabling systems include: ? ethernet 10base-t, 100base-t (fast ethernet), 1000base-t (gigabit ethernet), 10000base-t (10 gigabit ethernet over limited distances as specified in the industry 10gbase-t standards) ? 155 mb/s atm, 622 mb/s atm, 1.2 gb/s atm ? token ring 4/16 ? digital video and broadband/baseband analog video ? voice over internet protocol (voip) m ini -c om ? tx6 ? plus jack module 12 tg module: cj688tg* tx6500 ? utp copper cable plenum: pup6504**-u riser: pur6504**-uy tx6000 ? utp copper cable plenum: pup6004**-uy riser: pur6004**-uy tx6 ? plus patch cords 3 feet: utpsp3***y 5 feet: utpsp5***y 7 feet: utpsp7***y 10 feet: utpsp10***y 14 feet: utpsp14***y 20 feet: utpsp20***y dp6 ? plus flat punchdown patch panels 12-port dp12688tgy 24-port, 1 ru: dp24688tgy 48-port, 2 ru: dp48688tgy dp6 ? plus angled punchdown patch panels 24-port, 1 ru: dpa24688tgy 48-port, 2 ru: dpa48688tgy gp6 ? plus category 6 punchdown system see website (www.panduit.com) or catalog for complete system information termination tools jack module termination tool: tgjt wire snipping tool: cwst wire stripping tool: cjast *to designate a color, add suffix iw (off white), ei (electric ivory), ig (int'l gray), wh (white), bl (black), or (orange), rd (red), bu (blue), gr (green), yl (yellow), or vl (violet). **for colors other than bu (blue), substitute with wh (white), yl (yellow) or ig (int'l gray). ***for lengths 1 to 20 feet (increments of one foot) and 25, 30, 35, 40 feet, change the length designation in the part number to the desired length. for standard cable colors other than off white, add suffix bl (black), bu (blue), gr (green), rd (red), yl (yellow), or (orange) or vl (violet) before y at the end of the part number. for example, the part number for a blue 15-foot patch cord is utpsp15buy. tx6500 ? and tx6000 ? copper cabling systems ? specification sheet m ini -c om ? tx6 ? plus utp jack module
test results ?2008 panduit corp. all rights reserved. ww-cosp48 3/2008 iec 512-9b normal force mechanical test test method measurement typical test results vibration shock ? iec 512-6d iec 512-6c load (grams) circuit resistance (mohms) contact disturbance (microseconds) <40 durability iec 512-9a circuit resistance (mohms) <40 mating/un-mating iec 512-13b mating force (n) un-mating force (n) <20 termination cycles iec 352 number of cycles >20 <20 >100 <5 temperature life environmental test test method measurement typical test results humidity thermal shock iec 512-11c iec 512-11d circuit resistance (mohms) circuit resistance (mohms) circuit resistance (mohms) <40 <40 <40 climatic sequence iec 512-11a circuit resistance (mohms) <40 flowing mixed gas corrosion iec 512-11g circuit resistance (mohms) <40 low level circuit resistance electrical test test method measurement typical test results dielectric withstand voltage insulation resistance iec 512-2a iec 512-4a iec 512-3a resistance (mohms) 1000 v, 1 minute resistance (mohms) passed <20 >500 dimensions are in inches (dimensions in parentheses are metric). m ini -c om ? tx6 ? plus utp jack module worldwide subsidiaries and sales offices for a copy of panduit product warranties, log on to www.panduit.com/warranty panduit canada markham, ontario cs-cdn@panduit.com phone: 800.777.3300 panduit europe ltd. london, uk cs-emea@panduit.com phone: 44.20.8601.7200 panduit japan tokyo, japan cs-japan@panduit.com phone: 81.3.3767.7011 panduit singapore pte. ltd. republic of singapore cs-ap@panduit.com phone: 65.6305.7575 panduit australia pty. ltd. victoria, australia cs-aus@panduit.com phone: 61.3.9794.9020 panduit latin america jalisco, mexico cs-la@panduit.com phone: 52.333.666.2501 contact customer service by email: cs@panduit.com or by phone: 800-777-3300 and reference cosp48 visit us at www.panduit.com for more information .62 (15.87) .71 (18.06) 1.50 (38.15)
|
